EVC BDM100, Руководство пользователя

Страница: 3 / 34

EVC electronic GmbH -3- BDM100 Module
Important
Disclaimer / Warranty
The BDM module is for use by qualified personnel only. A warranty on our part for direct
damages and consequential damages, caused by the improper handling of our product or
additional products is excluded.
The interconnection between the BDM100 Module and the appropriate ECU is very easy.
Nevertheless you should read this manual carefully, because any failure may result in the destruction
of the ECU.
! To avoid damages on your BDM100-module or on an ECU, please carefully read this manual
before you start running the BDM100 Module with an ECU !
The BDM100 Module
In all cases, always connect the BDM100
module with your PC or notebook, first!.
The lower of the both blue LEDs on the
Front panel now should start flashing as
shown in picture A.
The BDM100 module has no own power
source. Its an USB-Device and obtain its
power via the USB cable.
Always make sure that
all necessary
connections are done, before you apply
power to an ECU!
The upper of the both blue LEDs
indicates that an ECU connected to the
BDM100 module is supplied with the
required voltage (picture B).
Pict. A: The BDM100 Module is always connected to
the USB cable first.
Pict. B: The BDM100 module connected to an
engaged ECU.