EVBox Iqon, Руководство по установке и пусконаладке

Страница: 20 / 54

4. Installation instructions
WARNING
Improper installation of Iqon may result in damage, which may cause injury or death. You must read
and obey the safety precautions at the beginning of this manual before you install, service or use your
EVBox charging station. The installer must ensure that the charging station is installed in accordance
with the relevant country-specific standards and local regulations.
WARNING
Make sure that connection of the electrical power cannot occur during installation. Put up caution tape
and warning signs to mark the working areas. Make sure no unauthorized persons enter the working
areas.
4.1. Prepare for installation
The following recommendations are a guide to help you prepare for the installation of the EVBox Iqon
charging station.
4.1.1. Plan installation
• Calculate the existing electrical load to find the maximum operating current for the charging
station installation.
• Calculate the distance from the power supply cabinet to the charging station installation to
determine the voltage drop. Local regulations may be applicable and can vary depending upon
the region or country.
• Obtain all necessary permits from the local authority that has jurisdiction.
• Refer to local wiring regulations to select the conductor sizes. Use minimum 10 mm
2
and
maximum 16 mm
2
copper wire, depending on the power supply available and the distance from
the power supply cabinet.
• Make sure that there is the specified free space around the charging station for ventilation
purposes.
• Use the correct tools and provide sufficient material resources and protection measures.
• Make sure that there is good cellular reception on the applicable frequency bands (see
specification sheet for more details) and/or good Wi-Fi reception where the Hub charging station
will be installed.
• Prepare the installation areas with the correct power wiring for each charging station and the
network cabling between the Satellite charging stations and the Hub charging station.
EN
4. Installation instructions
16