EVBox Elvi, Инструкция по установке и эксплуатации, Страница: 33 / 38

6. Maintenance instructions
6.1. Maintenance by user
The user of Elvi is responsible for the condition of the charging station, whereby both the law regarding
the safety of persons, animals, and property must be observed, as well as the installation regulations in
force in the country of use. Have Elvi and its installation inspected by a qualified electrician on a regular
basis and in compliance with installation regulations applicable in your country.
CAUTION:
Do not use a hose or a high pressure spray to clean Elvi.
CAUTION:
Do not use aggressive chemical cleaners or solvents to clean Elvi.
1. Remove dirt and natural organic matter on the outside of Elvi using a damp soft cloth.
2. Check the charging plug for dirt. Clean if necessary.
3. Check the charging plug for damage. A qualified electrician must replace the charging cable if the
charging plug is damaged.
6.2. Maintenance by qualified electrician
Only a qualified electrician is permitted to do the following maintenance procedures.
6.2.1. Remove the station
See the corresponding illustrations in manual B.
1. Switch off power to the charging station at the power supply cabinet.
2. Push the two unlock tools, slot first, fully upwards into the holes on the bottom of the station until
you hear a click.
3. With both hands, pull the station from the wall dock in a straight line to disengage the station
electrical connector from the wall dock.
Note:
To prevent damage to the locking tabs or the electrical connector, do not twist or skew the
station.
4. Remove the two unlock tools from the wall dock.
6.2.2. Replace the charging cable
See the corresponding illustrations in manual B.
Note:
When working on the station, place the station on a soft surface to protect it from damage. Be
careful not to damage the locking tabs on the station.
1. Remove the station.
6. Maintenance instructions
EN
29