EVBox Audi Wallbox, Инструкция по установке и эксплуатации

Страница: 41 / 74

40
English
Mount main assembly
onto wall bracket
1. Engage the top edge of the main assem-
bly with the top of the wall bracket and
then rotate the main assembly so it is flat
on the wall bracket.
2. Mount main assembly.
While holding the main assembly in place,
insert the four screws M6 x 16 mm together
with the bonded sealing washers 6.6 mm x
11 mm and fasten them.
Assemble wallbox
1. Install power supply cable.
a. Strip the outer insulation of the cable
to a length of 50 mm, then strip the
individual wires to 12 mm.
Warning
Not mounting all the screws and washers
on the inside of the main assembly when
mounting it onto the wall bracket will
affect the protection against moisture of
the wallbox, which could result in the risk
of electric shock, which could result in a
risk of injury or death.
› Make sure that all screws together with
their corresponding washers are moun-
ted.
Using stranded wires without ferrules
may result in improper installation, which
could cause accelerated aging of elec-
tric components and/or loss of electric
connection.
› Use crimped insulated ferrules for 1-pha-
se installation.
› Use crimped uninsulated ferrules for
3-phase installation.
Notice
!