EVAPCO eco-Air Series, Руководство пользователя

Страница: 14 / 39

14
Controller User Manual
Alarms will appear in the log as either Active, Ack, or Return. Table 3 illustrates each of the three states. The date and time columns
of the table indicate when the alarm was triggered. If an alarm is acknowledged, while active, the time stamp will be displayed in the
ACK Time column. After the condition that triggered the alarm is cleared, the time stamp will be displayed in the RTN Time column.
Status Image
Active
Ack
Return
Table 3
The states of alarms.
Some alarms require a reset on the operator interface after the triggering condition has cleared. An example is the Vibration Switch
Triggered alarm. When a vibration switch trips, the Reset button will be highlighted as shown in Figure 16 . After the switch is reset
on the unit, the Reset button must be pressed to clear the alarm.
The Alarms Screen with active alarm.
Figure 16