Support for Association Groups
ZW313 supports 3 association groups. A maximum of 5 node ID’s (nonmulti-channel devices) can be assigned to these association groups.
Association group_1:Z-Wave Plus Lifeline
Association group_1 is default to associate with the primary controller (Gateway/Hub/Controller) for ZW313 Status change report,
1. ZW313 will trigger AUTO report function if the Switch status had been changed.
2. When ZW313 high temperature alarm sends out notifications or releases notifications, ZW313 will auto report
Association group_2:basic set command
command. On (0xFF) or Off (0x00) to its associated group.
Restoring Factory Defaults
ZW313 is removed from the network and will be restored to the factory setting
All Configuration Parameters values and Association information will be restored to factory default settings and excluded from the network.
Remark : All the setting and data will be permanently deleted.
Please use this procedure only when the network primary controller is missing or otherwise inoperable.
When the output of the ZW313 is changed, On (0xFF) or Off (0x00). The ZW313 will automatically send out a related basic set
