EUTECH INSTRUMENTS CD 650 Скачать руководство пользователя страница 63

Страница: 63 / 127

7. Press

ESC (F4)

to go to measurement mode. The meter shows the relative

mV reading of the solution in measurement mode, if offset is not zero.

2.2 Calibration Report

Calibration report gives you information on calibration. It includes date & time on
which the last calibration was done and the offset.

2.2.1 To View Calibration Report:

1. From mV measurement mode, press left or right arrow key to navigate

to other available functions until you see

REPO

function in the LCD

2. Press

REPO (F2)

key. The calibration report is shown in the display.

3. Press

PRIN (F2)

to transfer the calibration report to the computer.

3. mV Measurement Mode

In mV measurement mode, the meter displays mV and temperature reading.
Depending on application, you can connect a suitable ORP probe to the meter or use
the pH probe.

3.1 Indicators in mV measurement mode

Figure 22 : mV Measurement Screen

Note:

The function of the keys available on the mV calibration/ report

screen is same as previously described in pH calibration with a user-
defined buffer section.

Содержание CD 650
































































































































Результаты поиска

Содержание CD 650

Отзывы:

EUTECH INSTRUMENTS CD 650, Инструкция по эксплуатации, Страница: 63 / 127

Результаты поиска

Содержание CD 650

Отзывы: