EUTECH INSTRUMENTS ALPHA PH 500 PHORP 2-WIRE TRANSMITTER (REVISION 1) Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 28

EUTECH INSTRUMENTS ALPHA PH 500 PHORP 2-WIRE TRANSMITTER (REVISION 1) Скачать руководство пользователя страница 2

Preface

This manual serves to explain the use of the pH 500 transmitter. It functions in two
ways, firstly as a step by step guide to help you to operate the transmitter.
Secondly, it serves as a handy reference guide. It is written to cover as many
anticipated applications of the transmitter as possible. If there are doubts in the use
of the transmitter, please do not hesitate to contact the nearest Authorized
Distributor.

Eutech Instruments/ Oakton Instruments will not accept any responsibility for
damage or malfunction to the transmitter caused by improper use of the instrument.

Remember to fill in the guarantee card and mail it back to your authorized
distributor or Eutech Instruments Pte Ltd.

The information presented in this manual is subject to change without notice as
improvements are made, and does not represent a commitment on the part of
Eutech Instruments Pte Ltd/ Oakton Instruments.

Copyright © 2002 Updated on Mar 2002. All rights reserved.

Eutech Instruments Pte Ltd/ Oakton Instruments

«
1
2
3
4
...
»

Содержание ALPHA PH 500 PHORP 2-WIRE TRANSMITTER (REVISION 1)





























Отзывы:

Нет отзывов