53
For Example:
How to set your ACL?
1. You must choose
Activated
to enable your ACL function.
2. Select the ACL Rule Index number (up to 16 number)
3. You can set the specific
Secure IP address
or set
0.0.0.0
for all IPs.
4. Choose
the
Application
which you want to access for this ACL Rule index.
5. Select
the
Interface
you want to access from.
6. After all settings are ready, click
SAVE
and continue next ACL Rule Index setting.
[Note]
1. You must set one ACL index to access your router via LAN interface. If you don’t, your
router cannot access other listed IP Address. (Refer to Index 1).
2. Remember! Once you active your ACL function, you only can access via router by listed
Secure IP Address.
7.2 Filter
The Router provides extensive firewall protection by restricting connection parameters to limit the
risk of intrusion and defending against a wide array of common hacker attackers. Go to
Access
Management
Æ
Filter
to set different IP filter rules of a given protocol (TCP, UDP, or ICMP) and
a specific direction (incoming, outgoing, or both) to filter the packets.
IP Filter is a more complex filtering tool, based more on IP and custom rules. Each of the indices
can hold six rules, and each interface can have four associated indices, allowing 24 rules per
interface. If all six rules in an index are Next rules, the data will be sent to the next index for
filtering.
