COM Port Setup
-
COM Status:
Set COM port for PTZ, RS-232 or RS-485.
-
PTZ ID:
The number must match the ID address set by the dome camera.
-
Baud Rate:
Set the value if necessary.
-
Data Bit:
Set the value if necessary.
-
Stop Bit:
Set the value if necessary.
-
Parity:
Set the value if necessary.
-
Flow Control:
Set the value if necessary.
-
PTZ Protocol / Status:
Display the PTZ protocol and the status of the connected dome camera.
-
Apply:
Confirm the settings.
System Commands (Available for Administrator only)
-
Factory Default:
Restore the settings to the factory defaults.
-
Reboot:
Restart the device.
28
