Sensor config:
Apply the sensor relays as trigger. Define the actions/parameters responding to sensed event.
-
Alarm in:
select one of the four GPINs as a sensor for the event triggering.
-
Alarm out:
When sensor is triggered, will send a signal to the device connected such as LED or
alarm. Statues will be displayed under GPIO.
-
Normal state:
set the relays’ initial status.
-
Pass alarm:
as described in motion config.
-
Email notice:
send email responding to a sensed event
-
Email attachment:
send email with attached video file.
-
FTP storage:
send video file to FTP server responding to a sensed event.
-
CGI alert:
enable the CGI alert responding to a sensed event.
-
Period time / week:
select the period of time/day in a week that the sensor will be activated.
- 22 -
