Motion Setup
Motion config:
Define parameters for actions responding to detected motion.
-
Motion Detect:
Set the Motion Detect feature for each channel to “ON” or “OFF”.
-
Alarm Out:
When motion is triggered, will send a signal to the device connected such as LED or
alarm. Statues will be displayed under GPIO.
-
Pass Alarm:
Adjust this option to determine the ending time of video clip after the event goes away.
The unit is in second.
-
Email Notice:
Enable or disable the Email notice when motion detection is triggered.
-
Email Attachment:
Set whether attach the video clip with the Email notice when motion detection is
triggered.
-
FTP Storage:
Enable or disable whether send the video clip to FTP site when motion detection is
triggered.
-
CGI Alert:
Enable or disable to send CGI alert when motion detection is triggered.
-
Period Time / Week:
Select the period that the motion detection should be activated. Day
、
night
、
weekday
、
weekend or all the time.
-
Sensitivity:
Set the sensitivity of motion detection.
- 21 -
