Eusso UNC 7800 series, Руководство пользователя

Страница: 50 / 54

Note: If FTP session quits immediately after issued by command, you should continue pinging the network
camera instantly. If the network camera replies to the ping command right after pinging, it means the network
camera may not enter the self-programming stage to update the firmware. If not updated, then you should
reboot the network camera and back to step 3 to try again.
For example, the vandal dome IP address is 192.168.0.200, then
C:\Documents and Settings\Administrator>cd \temp
C:\temp>ftp 192.168.0.200
Connected to 192.168.0.200.
220 192.168.0.200 Network camera FTP server ready.
User (192.168.0.200:(none)): root
331 Password required for root.
Password:
230 User root logged in.
ftp> bin
200 Type set to I.
ftp> put flash.bin
200 PORT command successful.
150 Opening BINARY mode data connection for flash.bin
226 Transfer complete.
ftp: 2097152 bytes sent in 10.11Seconds 207.43Kbytes/sec.
ftp> bye
221 Goodbye. <=Quit ftp session immediately
<=if the window is frozen, please open another dos session
C:\temp>ping -t 192.168.0.200
Pinging 192.168.0.200 with 32 bytes of data:
Request timed out.
Request timed out.
Reply from 192.168.0.200: bytes=32 time=2ms TTL=255
Reply from 192.168.0.200: bytes=32 time=1ms TTL=255
Reply from 192.168.0.200: bytes=32 time<10ms TTL=255
Ping statistics for 192.168.0.200:
Packets: Sent = 13, Received = 5, Lost = 8 (61% loss),
Approximate round trip times in milliseconds:
Minimum = 0ms, Maximum = 2ms, Average = 0ms
Control-C
Key in the path stores the “flash.bin”
Key in this command, change the IP to yours
Input the account, default is “root”
Input the password, default is “pass”
Key in this command
Key in this command
Key in this command
Key in this command and wait the upgrade is complete.
These messages mean the
upgrade are finished.
Press Ctrl+C to terminate the detection.