Eusso 2 & 4 Port VoIP Gateway, Руководство пользователя

Страница: 68 / 112

ITG User’s Guide
Task Prompt Type
From the remote host, enter the telnet command
followed by the IP address of the ITG you want to
access.
None telnet ip_addr
When the ITG prompts “ Login: ”, enter the user name
“eitg”
Login: eitg
When the ITG prompts “Password:”, enter the
password. The default password is “123” unless a
password was previously established using the
net set
user_pw command (Refer to the section describing net
set user_pw command later in this chapter for details
about the setting password).
Password: password
Upon successfully entered the password, the ITG displays greeting message and the
following prompts and you are ready to access the CLI commands.
EITG>
8.3 Command Help
Help for commands is provided by the CLI. Type help to see a listing of the top-level
commands. On most cases, if you enter a command using the wrong number of arguments or
inappropriate arguments, the CLI will give further usage.
8.4 Designating IP Address
Some commands require an IP address, which must be designated in a standard format. The
IP address format is 32 bits, written as four octets separated by periods (dotted decimal
format) that are made up of a network section, an optional subnet section, and a host section,
as shown in the following example:
192.168.0.1
8.5 Designating Port Number
Some commands require a telephony port number. The ITG designates the first port as port
number 0, the 2
nd
port as port number 1 and so on.
8.6 Command Reference
The following table list the CLI command in alphabetic order.
Command Description
atpm
Dial plan management command
Command Line Interface
56