Eusso 2 & 4 Port VoIP Gateway, Руководство пользователя, Страница: 77 / 112

ITG User’s Guide
set h323 endpoint_reg_type {
gw | terminal}
The set h323 endpoint_reg_type command is used to set the H.323 registration type. This
should not be confused with the H.245 terminal type, although the two parameters should be
programmed consistently. This parameter specifies how the ITG will register itself with the
gatekeeper, and has nothing to do with master/slave determination.
Syntax Description
gw The ITG registers itself to gatekeeper as a H.323 Gateway
terminal The ITG registers itself to gatekeeper as a H.323 Terminal
Default
The ITG registers to gatekeeper as a H.323 Gateway.
set h323 gk_addr ip_addr
The set h323 gk_addr command is used to specify the address of the gatekeeper when
configured for manual mode.
Syntax Description
ip_addr IP address of the H.323 gatekeeper
set h323 gk_max_tries count
The set h323 allow_call_wo_gk command is used to control how many registration attempts
will be made before the ITG considers itself to have failed registration. Once this number of
unsuccessful attempts have been made, the ITG will only be able to place calls if
allow_calls_wo_gk is true.
Syntax Description
count Number of registration attempt
Default
The default number of registration attempt is 2.
set h323 gk_mode {off | manual | auto}
The H.323 protocol allows calls to be established through H.323 gatekeeper. The set h323
gk_mode command is used to specify if call is establishmet through a gatekeeper.
Syntax Description
off Disables gatekeeper operation
manual Enables gatekeeper in manual discovery mode. The gk_addr must be set
appropriately.
Command Line Interface
65