19
There is a “
SECURITY
” window shows out when you select this category in MAIN
CONTROLS window. The maximum password is eight digits and there are three lines
“ENTER PASSWORD”, “ENTER NEW PASSWORD” and “RETYPE NEW PASSWORD” in
the window. Please follow the steps as below to modify the password.
1.
First of all, you need to key-in the factory default password “00000000” in password
line and press the “Enter” key.
2.
Then, enter the new password you wish in next line and press the “Enter” key.
3.
Retype the new password in bottom line again and press the “Enter” key for
confirming your typed password is matched or not.
4.
If the retyped new password has matched to the entering new password, the OSD
will jump back to MAIN CONTROLS window directly.
CONSOLE OSD Window :
The “ CONSOLE ENABLE/DISABLE “ means to manage the console of KVM switch. If you
select “ CONSOLE ENABLE “, it means that any user can use the console. If you select
“ CONSOLE DISABLE “(factory default ENABLE state), it means that any user will not be
allowed to use the console unless you enter the password. When you enter the password
already and pass the KVM switch authentication, the CONSOLE will be set to ENABLE.
After you finish using KVM switch, please don’t forget to set up CONSOLE ENABLE state
to DISABLE state.
••••••••
SECURITY
?X
ENTER PASSWORD
••••••••
ENTER NEW PASSWORD
••••••••
RETYPE NEW PASSWORD
CONSOLE
?X
ENABLE
DISABLE
