11
Pressing BANK Button to change BANK, and each BANK button assigns the channel to
designated PORT.
The LED display shows the Power On PC.
4 port Rack Mount USB KVM Switch
The Push Buttons
:
Pressing the individual button to get PC port you want.
Reset Button (
(“ Bank ” button) and
(“ PC 4 ” button )
):
To press both “PC 4 ” button and “ Bank ” button of master bank simultaneously can reset
KVM switch. This reset action will not only return KVM switch back to initial state --- Check
the password, but also re-check all of slave banks which connected to mast KVM Switch.
If you add a new KVM Switch as a slave bank, please use reset button of master KVM
Switch to automatically assign a new ID to it. You can view this new slave bank go through
OSD menu. The PC ports of KVM Switch does not be reset by reset command.
PC port LED Indication:
There are two LEDs--- Power LED
(The LED is marked by “ P “)
and Link LED
(The LED
is marked by “ O “)
accompanied with each PC port.
When you select one of four PC ports and this PC is shut down or this PC port is
disconnected to the PC, the selected power port LED is off (But, if this PC is PC99 type, the
selected power port LED is lit) and the Link LED is flash. When you select one of four PCs
ports and this PC is powered on, the selected port Link LED is lit.
8 port Rack Mount USB KVM Switch
The Push Buttons
:
Pressing the individual button to get PC port you want.
Reset Button (
(“ Bank ” button) and
(“ PC 8 ” button )
):
To press both “PC 8 ” button and “ Bank ” button of master bank simultaneously can reset
KVM switch. This reset action will not only return KVM switch back to initial state --- Check
the password, but also re-check all of slave banks which connected to mast KVM Switch.
If you add a new KVM Switch as a slave bank, please use reset button of master KVM
Switch to automatically assign a new ID to it. You can view this new slave bank go through
OSD menu. The PC ports of KVM Switch does not be reset by reset command.
PC port LED Indication :
There are two LEDs--- Power LED
(The LED is marked by “ P “)
and Link LED
(The LED
is marked by “ O “ )
accompanied with each PC port.
When you select one of eight PC ports and this PC is shut down or this PC port is
disconnected to the PC, the selected power port LED is off (But, if this PC is PC99 type, the
selected power port LED is lit) and the Link LED is flash. When you select one of eight PCs
ports and this PC is powered on, the selected port Link LED is lit.
16 port Rack Mount USB KVM Switch
The Push Buttons
:
Pressing the individual button to get PC port you want.
To press both “ Shift “ button and port 1(or port 2, 3,4,5,6,7,8) individual button