Eusonar Praktik 6 Pro 2, Руководство пользователя

Страница: 19 / 37

19
probing and processing considerably differ from the
depth measurement in other sonar modes. Depth
measurement for the difficult condition is performed
especially precisely, for example, fleet water and
grown-over reservoirs may be referred to these
conditions. None of the fish and any other date on the
water depth is displayed.
Any activities and adjustments on the part of the
user are not required for operation in this mode.
Sensibility selection as performed automatically
depending on the reservoir conditions. The dead end is
always adjusted as 50 centimeters.
Diameter of the sonar spot at the bottom is measured in meters at the bottom of the cone
base. In the algorithm of calculation of the spot the data is involved, taking into account the
attenuation of the acoustic wave in the water, as well as numerous experimental data for sonar
“Praktik”. In reality in the water the beam cone has the shape of the inverted flame of a candle,
rather than the usual cone with the angle of 40 degrees. It is necessary to clarify that such
geometrical parameters of the sonar beam were defined by us specifically for practical
applications, since in such beam focuses the maximum density of acoustic power, and the angler
can clearly watch his bait (fishing tackle, plug, lure, etc.) on the screen.
ATTENTION! The Depth gauge mode works correctly with inactive sensor/ otherwise the
depth measurements will be unstable.
Depth gauge mode is recommended in cases when in other modes of the sonar the depth
reading is not stable on account of condition at the reservoir or confident depth definition with
large numbers indication is required.
Fleet water mode