Page 7
GENIUS LED 100
5. INSTALLATION AND START-UP
F
ig
. 1
F
i
g. 2
1. Remove the battery cover by pulling it upwards at the notch (Fig. 1).
2. Now insert the batteries.
Pay attention to the correct polarity! Do not use rechargeable batteries.
3. Place the battery cover back on the GENIUS LED 100 (Fig. 2) by pressing until it clicks.
5.1 INSERTING/CHANGING BATTERIES
BATTERY
:
If the batteries are weak, the battery LED
will flash continuously until the batteries are changed.
