Page 10
GENIUS LCD 100
6.4 ADAPTER
NOTE:
Remove the connectors of the plastic adapters completely before using one of the included adapters! For Danfoss RA/
RAV, use the enclosed screw and nut.
For the following valves no adapter is required:
Heimeier, Junkers Landy + Gyr, MNG, Honeywell, Braukmann, as these have a thread of M30 x 1.5mm. The adapters for
Danfoss RAV (pin must be plugged on the valve tappet) Danfoss RA and Danfoss RAVL are included.
For the following valves an adapter is required:
Herz M28 x 1,5 mm, Comap M28 x 1,5 mm, Vaillant 30,5 mm, Oventrop M30 x 1,0 mm, Meges M38 x 1,5 mm, Ondal
M38 x 1,5 mm, Giacomini 22,6 mm, Rossweiner M33 x 2,0 mm, Markaryd M28 x 1,0 mm, Ista M32 x 1,0 mm, Vama
M28 x 1,0 mm, Pettinaroli M28 x 1,5 mm, T+A M28 x 1,5 mm, Gampper 1/2/6; Danfoss RA/RAV/RAVL.
For additional adaptors, please visit: http://shop.eurotronic.org
If you are not sure which valve you are using, please visit:
https://eurotronic.org/Service/FAQ
here you will find a list of
various valves and adapters.
RAV
RA
RAVL
RAV Pin +
ill. 6
