4
4) Manual memorization of FM/ AM (MW) or SW radio stations
To memorize radio stations with weak signal or your favourite radio station which has not been
scanned during scanning operation, proceed as below:
1. If you know the frequency of your desired radio station, press the button numbers from 0 to 9
to dial its number and acce
ss to it. For example, for FM radio frequency “1062MHz”, you can
press number buttons “1", "0", "6" and " 2”.
Note: If you don't know its frequency, use the tuning button to search it.
2. Short press
button. The inscription "SAVE" displays, and the alloted number of the
radio station beginning with "P0.." displays.
3. If you want to listen to your radio station next time, you have 3 options which are below:
a. Press or to reach it.
b. Dial its frequency (see procedure in step 1 above).
c. Dial its alloted number. For example if the radio has been saved as "P038", dial "38".
5) Manual deletion of FM/ AM (MW) or SW radio stations
To delete a radio station, proceed as below:
1. Press or to reach it or dial its frequency.
2. Press and hold
till "
dEL
" displays. The radio will become mute during deletion
operation. After being deleted from the preset list, the radio will play the next radio station of
the stored list.
6) USB/ TF MODE
- The radio only recognizes MP3 audio file formats. If the files are other than those mentioned
above, reading will not be possible.
- The USB key or SD card should contain at least one MP3 audio file in order to be detected by
the radio.
•
Insert your USB key or TF card, containing one or several MP3 files
inside, correctly. The MP3 files play automatically.
•
Press
to pause or resume listening MP3 file.
•
Press to play next MP3 file. Long press to fast forward.
•
Press
button to play previous one. Long press
button to rewind.
•
Select one specific MP3 file by using buttons numbered from 0 to 9 (for example, continuously
press buttons 1+6+8 to select the 168
th
MP3 file, but if the total quantity of MP3 files is less
than 168, the current MP3 file will continue playing).
•
Repeatedly press to toggle between the 2 repetition modes: "
ONE
" (repetition of current
MP3 playing), "
ALL
" (repetition of all MP3 files and folders). Then when you reach the desired
one, stop pressing. select the desired one.
•
Press MP3 to toggle between
USB
,
TF
and
AUX
mode. Note: Make sure that the
corresponding memory device is inserted for USB and TF mode and the audio cable jack for
AUX mode is inserted and connected to the audio device to enable the switching from one
mode to another.
C. AUX FUNCTION
Connect your external audio device (such as a CD player or other player) with the
radio (AUX IN port), using a 3.5mm plug cord (See figure 3 -
included)
. MP3 audio
files contained in your computer can be heard on the radio which acts as an external
speaker.
Fig. 2
