5. Mount the feeder base(6) on the interim rod(7).
6. Insert the feeding trough(4) into the locator hole situated in the middle of the
feeder base(6).
7. Insert the 4 roof supports(5) into the corresponding locator holes on the feeder
base(6) and plug the roof bracket(3) into the roof supports(5).
8. Finally, mount the roof(2) on the roof bracket(3) and insert the solar lamp(1) into
the corresponding hole in the roof(2).
9. Now you can select a location for the bird bath and secure it to the ground using
the enclosed safety pegs(15).
Turning on the solar lamp
In order to activate the solar lamp, remove the solar lamp from the roof and set the
switch to ON. To turn it off, set the switch to OFF.
Remark: The product requires 8 hours charging in the sunlight for 6-8 hours
discharging at night for the first time use and for the later use.
Changing the batteries
The solar light comes with a 1.2V 600 mAh Ni-MH rechargeable battery.
Please keep the battery dry.
Defective rechargeable batteries must be removed and disposed of responsibly.
1. Remove the lamp’s outer and inner lampshades by turning them
counter-clockwise, see diagram B.
2. Remove the battery door.
3. When inserting the new rechargeable batteries, ensure that the polarity is correct.
4. Replace the inner and outer lampshades on the lamp.
Note: Do not overexert during this procedure to avoid the breakage of the solar
light.
