Diagram B
1. battery cover
2. ON/OFF switch
3. inner lampshade
4. outer lampshade
Assembly & Start up
For the purpose of safety, lay out a protective sheet during assembly in order to
prevent damage to the floor.
Please refer to the diagram A for instructions during assembly of birdbath.
1. Set the base(14) on an even surface and screw the pole holder(13) to the
base(14).
2. Set the plant pot(12) on top of the pole holder(13) and screw the pole(11) to the
respective holder(13).
3. Now assemble the water basin(9),securely into position together with the rubber
seal(8) and the interim rod(7),which come down from above to the plastic
screw(10).
4. Screw the mounted water basin(9) onto the pole(11).
