Eurotops 29054, Инструкция по эксплуатации, Страница: 37 / 40

GB
intended for the particular type of power tool, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from intended could result in a hazard- ous situation.
5. Service
Please use a qualified expert who uses original replacement parts to repair your power tool. This will ensure proper
functioning of the power tool.
ADDITIONAL SAFETY INSTRUCTIONS
Before using the appliance

Check the following:
- Make sure the voltage of the hot air gun corresponds with the power voltage;
- Are the mains lead and the mains plug in a good state: strong, without ravels or damages.

Caution is advised when using long extension cables

Do not use the appliance under moist circumstances;

The metal mouthpiece gets hot. Watch out and do not touch the metal mouthpiece;

Prevent damage of the heating element. Do not lock or block the mouth piece or the ventilation openings;

Do not leave the appliance when switched on;

When in operation do not point the device at people or animals

Never look into the hot air nozzle

Do not use this device in rain or damp surroundings, or near explosive or flam- mable products.

Do not use the device on or near very dry spots to avoid fire

Always remove the plug from the socket when not using the device, when replacing the nozzles or during
maintenance of the device

Do not point the device at the same place for longer periods of time

Do not hold the device too close to the surface about to be worked on as the device can overheat

Pay attention to the direct / indirect work- space as the heat can ignite flammable materials, which are close by but
not nec- essarily in view

Do not allow the hot parts of the device to touch the cord or other flammable materials

The device should always be clean, dry and free of grease and oil

Do not use the appliance for purposes other than for which it is intended.
When operating the appliance

If you are going to use the hot air gun, vapours and gas can be released during a short time. This can be harmful for
your health. Asthmatics can suffer hindrance of it;
 Before connecting the plug to the mains voltage you have to check if the switch is in position “0”;

Keep the mains lead always away from the mouthpiece of the hot air gun;
When using electric tools, basic safety precautions should always be followed to reduce the risk of
fire, electric shock and personal injury.
Read all these instructions before attempting to operate this product and save these instructions.
This appliance operates at a temperature of 650 degrees without visible signs of this temperature (no
flames), still there is a chance of fire risk. Watch out for the hot air stream from the mouth piece. This air
stream can cause burns.