26
5. Operator Level 2
Level 2 provides access to additional parameters.
Access to these is protected by a pass code.
5.1
To Enter Level 2
1.
From any display press and hold
!
.
2.
After a few seconds the display
will show:-
3. Release
!
.
(If no button is pressed for 45 seconds the
display returns to the HOME display)
4. Press
▲
or
▼
to
choose
Lev 2
(Level 2)
5.
After 2 seconds the display will
show:-
6. Press
▲
or
▼
to enter the
pass code. Default = ‘
2
’
7.
If an incorrect code is entered
the controller reverts to Level 1.
5.2
To Return to Level 1
1.
Press and hold
!
2. Press
▼
to select
LEv 1
The controller will return to the level 1 HOME
display. Note: A pass code is not required when
going from a higher level to a lower level.
5.3
Level 2 Parameters
Press
!
to scroll through the list of parameters.
The mnemonic of the parameter is shown in the
lower display. After five seconds a scrolling text
description of the parameter appears.
The value of the parameter is shown in the upper
display. Press
▲
or
▼
to adjust this value. If
no key is pressed for 30 seconds the display returns
to the ‘HOME’ display.
Backscroll is achieved when you are in this list by
pressing
▲
while holding down
!
.
The following table shows a list of parameters
available in Level 2.
