Eurotech EDI604NF, Инструкция по использованию и установке

Страница: 25 / 32

25
CERAMIC-GLASS COOKTOP
1.Induction hotplate rear left
3.Induction hotplate rear right
4.Induction hotplate front right
6.Induction hotplate front left
7.Hob control panel
Hob control elements
A. ON/OFF sensor of cooking zones
B. Safety lock on/off and child lock sensor
C. ON/OFF sensor of cooktop
D . Sensor (-) of timer and cooking zone
E . Sensor (+) of timer and cooking zone
Hob control
• After turning the ceramic glass hob on all displays come on for a moment.
The hob is ready for operation.
• The hob is fitted with electronic sensors which are switched on if you touch
the relevant circle for at least one second.
• Each sensor activation is followed by a sound signal.
• Avoid placing any objects on sensor surface (possible error
signalization_Er03).
• Always keep the sensor surface clean.
Activating the hob Touch the sensor (C) for at least one second. The hob is now active, and all
hotplate power indicators indicate »0«, decimal dot is flashing.
Now you need to select the next setting within 20 seconds, otherwise the
hob switches off again.
Turning hotplates on
After turning the hob on using the sensor (C), within the next 20 seconds start
one of the hotplates.
• Touching the desired hotplate sensor (A), its relevant power indicator
indicates »0«.
• By touching sensors (E) or (D) set the desired cooking power from 1 to 9.
Continuous pressing of (E) or (D) sensors the power level is
automatically increased or reduced. Another procedure is to change
power in steps is by intermediate touching of relevant sensors.
Setting is always possible for one hotplate only at the time. Power
display indicates »0«, or „H“, depending on the existing temperature of