background image

EUROSTER 11K CONTROLLER USER MANUAL

10

c) Layout 3 : CH system with plate heat exchanger and DWH tank 

ATTENTION Since in the 3

rd

  layout heat surplus is transferred to the DWH

tank, temperature of water in that tank may theoretically reach the critical
threshold (as preset by the OH installer parameter value).

P1

 pump is activated if the fireplace temperature exceeds the preset temperature

P2

 pump is activated if the fireplace temperature exceeds the preset temperature and

the 

RT

 signal is ON and the DWH priority is not active

P3

 pump is activated if the tank temperature drops down and the fireplace temperature

is sufficiently higher than the tank temperature

AUX

 output is deactivated if the fireplace temperature exceeds the 

AUX

 temperature or

RT

 is turned off

Throttle is controlled (open/closed) to maintain the preset temperature.

7. COMPATIBILITY WITH STANDARDS AND CERTIFICATES

The E11K controller meets all requirements of the EMC and the LVD EU Directives. The CE
Conformity Declaration is available on the http://www.euroster.com.pl Internet webpage.

8. SPECIFICATIONS

a) Temperature range

0°C – 99°C

b) Mains

230 V 50 Hz

c) Combined current consumption

max. 3 A 

d) Case 

flush-fitting 4M electrical box

4. KIT CONTENTS

a) Euroster 11K controller 
b) S1 temperature sensor with 2 m long silicone-insulated cable 

c) S2 temperature sensor with 2.5 m long cable 
d) sensor hose clips

e) this Installation & Operation Manual

ELECTRONIC WASTE MANAGEMENT INFORMATION 

We made every effort to get as long controller lifetime as possible. However,

the   device   is   subject   to   natural   tear   and   wear.   We   ask   you   to   have   a
controller that will not meet your requirements any more brought into an

electronic waste management facility. Electronic waste is collected free of
charge by local distributors of electronic equipment.
Inappropriate  management of electronic waste may lead to an unnecessary
environment pollution. 
Cardboard boxes should be disposed of at a paper recycling facility.

Содержание 11K












Отзывы: