EUROSTER 11E USER MANUAL
5
11 TROUBLESHOOTING
a) Device is dead
Burnt mains fuse or ROM failure. Replace the fuse or have the controller serviced.
b) Sensor icon on the display blinks, “Sh” or “OP” letters next to the icon
Sensor circuit shorted (Sh) or opened (OP). Check/replace the sensor cable or ship the
controller (together with the sensor) to service.
c) Pump does not operate
Turn on the controller and make sure that pump icon is displayed. If not, check the presets or
restore factory ones (see section Błąd: Nie znaleziono źródła odwołania). Check pump
connection.
d) Controller knob operates erratically
Pulse generator failure. Have the controller serviced.
12 COMPATIBILITY WITH STANDARDS/CERTIFICATES
The
EUROSTER 11E
controller meets all requirements of the EMC and the LVD EU Directives.
The CE Conformity Declaration is available on the
http://www.euroster.com.pl
Internet
webpage.
13 SPECIFICATIONS
a) Mains
230 V 50Hz
b) Current consumption
max. 7 mA (1.6 W)
c) Output rated load
3 A
d) Length of cables
1,5 m
e) Dimensions (width x height x depth) 150 x 90 x 54 mm
14 KIT CONTENTS
a) controller box with temperature sensor
b) sensor hose clip
c) box fasteners/anchors
d) this Installation & Operation Manual
e) template to drill holes for fasteners/anchors
