RELEASE ER2017_06_
13
Installation and maintanance manual
Projector lift Mod. SI-H 100
This document is property of Euroscreen Srl.
Any distribution, reproduction, copying or publication of this document is prohibited.
At the end of the life of the lift, it has to be waste.
Please follow the procedure below.
If the machine has to be stored before wasting, please make the following
operations:
-Disconnect it from the mains.
-Put the lift in the original box.
-Put on the machine the following note:
“CAUTION: DO NOT USE THIS MACHINE
PRODUCT TO BE WASTED”
5.1
WASTE OF PROJECTOR LIFT
5.0 OUT OF ORDER
Before starting waste of the projector lift, please check that it is disconnected
from the mains.
In case the lift is still connected, disconnected it from the mains.
When wasting it, it is necessary to divide the plastic parts from the electrical
components in order to waste them properly following the recycling norms.
As regards the mechanic parts of the lift, it is suggested to divide steel parts
from other metals or alloys parts so that they can be sent for a proper recycling
process.
Dismantling the lift, please pay attention to all heavy metal parts in order to avoid
crushing.
Wasting of the components have to be carried out according to the laws in force
in the country where the lift is installed.
In any case, EC Directives have to be respected:
-91/156/CEE waste
-91/689/CEE dangerous waste
-94/62/CE
packaging and packaging waste
These procedures have to be followed in order to recycle and waste in the
best way all the components and to avoid dangers for health and environment,
specifically avoiding:
-dangers for water, air, soil, fauna and flora;
-noises and smells;
-damages to landscape and to cultural places based on the norms in
force.
