User manual - Mixpro 100
202005-434-ENG
P10
4. USE OF THE MACHINE
4.1. PREREQUISITES
•
The electric connection has to be 230 V - 16 A - 50 or 60 Hz with a 3 x 2,5 mm cable reel of 40m
maximum, completely unreeled.
•
The mixer is equipped with a security grid (A). If the grid is open, the display (J) shows SEC and the
mixer will not start. Close the grid to activate the mixer.
START / STOP
•
Once the machine has been connected, the machine is in the stop mode, the display (J) shows OFF.
•
One push of the ON/OFF button (1), the display (J) shows the set value of the speed in %, the warning
light (L1) lights up, the machine is ready.
•
When the machine is working (warning light (L1) is on), one push of the button ON/OFF (1) will switch
the machine off. The display (J) will show OFF and the warning light (L1) will switch off.
MIXING
•
One push of the button MIXING (2) will provoke the start-up of the mixing (alternate rotation) and the
warning light (L2) lights up.
•
The button (4) and (5) allow you to increase or to reduce the speed of rotation.
•
One push on the button EMPTYING (3) provokes the rotation of the mixer in emptying mode (backwards
rotation) and the light (L4) lights up.
WATER DOSAGE
•
Set the wanted water quantity with the buttons (8) and (9). The display (K) will show the set value in
liters. Once you have set the water quantity, the display (K) will once again show the last injected water
quantity
•
One push of the button DOSAGE (6) starts the dosing of the water, the warning light (L4) lights up
during the duration of the dosing and the display (K) increments the injected water quantity. Once the
set amount has been reached, the water dosage stops automatically and the warning light (L4) switches
off.
•
During the automatic cycle, one push of the button DOSAGE will pause the dosing. Another push will
re-start the cycle.
•
One push of the WATER provokes a water flow as long as the button is kept pressed. The
display (K) will add the water quantity to the one previously shown. This function is only possible
outside of the automatic water dosing seen above.
In case of a dysfunction of the machine, one 3 second push on the ON/OFF (1) will allow
you to verify that the power supply is over 210 V.
Содержание MIXPRO 100
Страница 14: ...User manual Mixpro 100 202005 434 ENG P14...
