EUROPRO COMPACT-PRO 60, Руководство пользователя

Страница: 8 / 36

User manual - COMPACT-PRO 60 & 80 201902-340-ENG P8
3. WARNING (continued)
3.1. SAFETY (continued)
SAFETY SYSTEMS
This machine has been designed to allow working with the maximum safety .
So safety sensors and emergency stop has been setted on your machine without complicating your
work .
We are insisting on your caring to maintain them in good condition and above all not to remove them .
In case of malfunction, please contact immediately your dealer .
HYDRAULIC
This machine is equipped with high pressure hydraulic circuits (200 bar) .
The following insctructions are essential for your safety:
• Never tighten a hydraulic connection while the machine is working .
• Never try to wipe an oil drop on a hose or hydraulic component with your finger while the machine
is working .
• Take care of the good condition of the plumbing (a damaged or blistered rubber must be changed
immediately) .
• Check regularly if the circuit does not have any leak .
• In any case, do not touch hydraulic parts (even when the machine is not working) because the
components shall be hot and there is a burn risk .
SAFETIES AND PROHIBITIONS
• The mixer grid rising up causes the mixer movement stop .
• The hopper grid rising up causes the screw movement stop .
• Stop of the projection stops compressed air consumption and pump rotation .
• As soon as the work is recovered, air release allows the pump restart .
• Emergency stop is located on the machine hood . Do not hesitate to use it if needed, this will
immediately stop the motor .
• To restart the machine after emergency stop button pushed, follow this procedure:
- Put the command handles in central position .
- Rearm emergency stop .
- Command panel lamps must be lighted-up .
- Engage the starter with the contact key .
- Resume projection procedure .