EUROPRO COMPACT-PRO 60, Руководство пользователя

Страница: 17 / 36

201902-340-ENG User manual - COMPACT-PRO 60 & 80 P17
5. USE OF THE MACHINE (continued)
5.5. WATER DOSER
B1 Start/Stop, stop dosage and reset
B2 Start / Pause / Restart of the dosage
B3 Addition of water by pulse
B4 Increase of the dosing set point (desired water volume)
B5 Decrease of the dosing set point
A1
Display of the actual flow rate
A2 Display of the set point
On / Off
• When the ignition is turned on or the engine is running, the water doser indicates OFF .
• Pressing the ON / OFF button switches the doser on .
• The display (A1) indicates "0" and the display (A2) the value of the last setpoint .
If the water doser is ON and the engine is stopped, it will automatically switch back to
OFF when the engine starts. It is therefore important to avoid starting a dosing cycle
during this time.
Water dosage
• Set the wanted water quantity with the buttons (B4) and (B5) . The display (A2) will show the set value in
liters .
• One push of the button "DOSAGE" (B2) starts the dosing of the water, the warning light (L2) lights up
during the duration of the dosing and the display (A1) increments the injected water quantity . Once the set
amount has been reached, the water dosage stops automatically and the warning light (L2) switches off .
• During the automatic cycle, one push of the button "DOSAGE" (B2) will pause the dosing . Another push
will re-start the cycle .
• One push of the button "+WATER" (B3) provokes a water flow as long as the button is kept pressed. The
display (A1) will add the water quantity to the one previously shown . This function is only possible outside
of the automatic water dosing seen above .
B1
B2
B4
A2 A1
B3 L1 L2
B5