background image

User manual - COMPACT-PRO 60 & 80 

201902-340-ENG

P34

10. WARRANTY 

10.1. WARRANTY CONDITIONS

Each product is delivered inspected and tested .

We exclude any warranty for visible defects for which the customer did not claim within 48 hours .

The sold equipments are covered by the warranty for the period defined by the manufacturer from the 

purchase date, onwards the date on the original proof of purchase being valid .

This warranty covers any equipment against any manufacturing or material defect for normal use and 

service .

The defects or deteriorations caused by natural wear, external accidents or a modification, use, storage 

or treatment of equipments not planned by the manufacturer, nor specified by ourselves, are excluded 

from any warranty .

Are expressly excluded from the warranty the defects coming from:

- a bad use

- the application of abrasive or corrosive products

- an inappropriate installation

- negligence

- an insufficient maintenance or cleaning

- chemical, electrochemical or electric influences

- any change in the normal process of use

The following wearing parts are not covered by the warranty:

- rotors, stators, driving shafts, connecting rods, seals, cleaning balls

- spray guns, lance, nozzle, hose, needle kits

- cylinders, piston rods, prime/spray valve assy, seal kits, membranes, suction and delivery valves

- carding machine vanes

- filters, oils

The warranty also excludes the equipments:

- on which the serial number was erased or made illegible

- on which unauthorized people made attempts of repair

- which were totally or partially dismantled

Our equipments are covered by a warranty (parts and labour) of 12 months following the purchase .

The duration of this warranty can be extended by 6 months by completing the warranty extension form 

on our website within 4 weeks after purchasing: www .euromair .com (section «Warranty»)

The defective equipments must be sent at the customer’s charge in the place we shall have specified 

him . The warranty will be subject to the presentation of the invoice . Then we will be able to proceed, 

free of charge, to the repair of the defective equipment .

The equipments repaired (under warranty) will be shipped free of charge to the customer during the 

first year of warranty. 

Beyond this date, the transport of the repaired equipment will be chargeable to the customer .

In case of intervention of our services on a breakdown caused by the customer or a breakdown excluded 

in the above-mentioned conditions, the costs of repair and transport will be charged to the customer .

We exclude any responsibility for any consequential damages suffered by the customer, such as, but 

this without restriction, the losses of income, turnovers, loss of image, of whatever nature .

In any case, our responsibility will be limited to the amount paid by the customer for the defective 

equipments .

Any action of the customer against us relative to the warranty of the equipments will be prescribed to 

the deadline of 1 year from the day of the discovery of the cause of the action .

Содержание COMPACT-PRO 60





































Отзывы: