EuroPower EP10000E H/MA, Руководство пользователя

Страница: 10 / 20

www.EUROPOWERgenerators.com
EP10000E-EP12000TE-IP54-EP13500TE-EP12000E-EP16000TE-
EP14000E-EP18000TE
Pg. 10 / 13
Doc.nr.:0004598
Opsteller: MH Revisie:02 Revisor: BL
Opsteldatum: 15/04/2020 Goedkeurder: GD Revisiedatum: 28/06/2021
5.7. Maintenance (see also chapter 10):
All maintenance points (air cleaner, oil level dipstick, oil drain
bolt, oil filler cap, oil filter, fuel filter, valves, spark plugs) are
very good accessible. For normal maintenance activities, check the
engine manual. For engine or alternator repair, consult your dealer.
5.8. Safety for the users:
The standard version of the generating sets EP10000E
– EP12000TE-IP54 -
EP13500TE - EP12000E - EP16000TE - EP14000E – EP18000TE are connected
following the IU electrical scheme. This means that for connection of
charges class 1 (charges with earth) there is a maximum of 1 charge
only, and for charges class 2 (charges with double insulation, to be
recognized by the “double square” pictogram on the machine) there is no
limitation in the quantity of charges connected at the same time on the
generating set. Contact your distributor for details on the above
subject.
Still you have to respect the minimum square (mm²) and maximum length
of the cables you are using (to assure the correct switching off of the
thermal-magnetic protection in case of short-circuit).
Insulation protection or earth leakage protection are available as an
option.
Table: of minimum cable section (in mm²) and maximum cable length (in
m) in function of the current (in A)
Cable length Cable length Cable length
Current in A 0 to 50 metres > 50 to 100
metres
> 100 to 150
metres
6 1.5mm² 1.5mm² 2.5mm²
8 1.5mm² 2.5mm² 4mm²
10 2.5mm² 4mm² 6mm²
12 2.5mm² 6mm² 10mm²
16 2.5mm² 10mm² 10mm²
18 4mm² 10mm² 10mm²
24 4mm² 10mm² 16mm²
26 6mm² 16mm² 16mm²
36 6mm² 25mm² 25mm²
50 10mm² 25mm² 35mm²
6. INCORPORATION OF THE GENERATING SET
Consult your EUROPOWER dealer or EUROPOWER Generators.
See the “Mounting instructions” to be found with “Declaration of
Incorporation according to 2006/42/EG” for generating sets that do not have
the EC Declaration of Conformity IIA.