6
5.2 Daylight Saving
This option contains two elements:
5.2.1 Hour Adjustment
If the user number is 1 (master user), 3,4,5 or 6 then this routine causes Hour Change on
Sunday. Reselection of this routine toggles the Hour Adjustment.
5.2.2 Soft Start
If the user is the service user (i.e. user 2) the panel prompts "ARE YOUR SURE?". Pressing
the <YES> key will cause a reset of the panel.
6. Immediate Functions
Pressing the <NEXT> key or the <PREV> key moves forwards or backwards respectively
through 2 options available and the <ENTER> key or the <YES> key selects the option. The
<QUIT> key exits the routine.
6.1 Immediate Literal Execute
This routine allows the user to enter a literal string to be executed immediately. Type the
literal string and press the <ENTER> key (with the cursor in th normal orientation) when
finished.
6.2 Immediate Literal Edit
This routine allows the user to edit a literal. Selection of this option prompts the user to enter
the literal number to be edited and then displays the literal in edit mode. Change the literal as
required and press the <ENTER> key (with the cursor in normal orientation) when finished. The
revised literal will now be stored in memory.
7. Set-up Test Option
Pressing the <NEXT> key or the <PREV> key moves forwards or backwards respectively
through the 5 options available, and the <ENTER> key or the <PREV> key selects the option.
The <QUIT> key exits the routine.
7.1 User Set-up
(i) The panel displays "SET USER CODES" followed by the prompt "ENTER SUITE NO.0".
Press the <NEXT> key to display the desired number or enter it directly. Press the <ENTER>
key to select this number.
(ii) The panel prompts "ENTER USER NO.". The default user number is 1 but another can be
selected by using the <NEXT> key or by entering the number directly. The valid selections are
1,2,3,4,5. If the user name is to be changed then press the <CHANGE> key and read (iii).
Otherwise press the <ENTER> key and go to (iv).
(iii) The previous name, which may be the default name, is displayed in edit mode. This name
may be changed by first deleting it using the <SHIFT> key (maximal length restriction) and then
re-entering it.
On completion, press the <ENTER> key with the cursor in the normal orientation.
(iv) The prompt "ENTER USER CODE ----" is now displayed. Pressing the <ENTER> key
leaves the code unchanged. (In the case of users 3,4, and 5, the <ENTER> key will not be
accepted if no previous value exists.) Otherwise a 4 digit code may be entered. This code
