2
SAFETY INFORMATION
Products manufactured by us are safe provided they are installed, used and maintained in
refer to this manual if you have any doubt.
The appliance must be earthed. Improper grounding could cause electrical shock.
If the Heater begins to make an odd noise, smell or smoke.
Heater Indicator does not light up.
Water temperature cannot be controlled.
If found water leakage from inside.
When the Shower is used by someone such as child,elderly person, sick person and
and adjust the water temperature before using.
to protect the shower unit against possible damage.
to all exposed metal parts of other appliances and services in the room which in the heater
When removing the unit from package, small amount of water may found inside.
This is normal as the unit is tested during manufacturing process.
Note:
1.4
1.5
1.6
This Undersink Heater must be permanently connected to the direct main line supply.
A plug and socket is not recommended to be used.
For the correct size of wire conductor corresponding to di erent electrical loadings,
please refer to Table 1.
This Undersink Heater operates at a minimum wat
ow rate of 3.0 liter/min and
maximum inlet water pressure of 6 Bar.
liter/min) to trigg
ow switch.
abnormal rise in water temperature.
2.6
2
SAFETY INFORMATION
Products manufactured by us are safe provided they are installed, used and maintained in
refer to this manual if you have any doubt.
The appliance must be earthed. Improper grounding could cause electrical shock.
If the Heater begins to make an odd noise, smell or smoke.
Heater Indicator does not light up.
Water temperature cannot be controlled.
If found water leakage from inside.
When the Shower is used by someone such as child,elderly person, sick person and
and adjust the water temperature before using.
to protect the shower unit against possible damage.
to all exposed metal parts of other appliances and services in the room which in the heater
When removing the unit from package, small amount of water may found inside.
This is normal as the unit is tested during manufacturing process.
Note:
1.4
1.5
1.6
This Undersink Heater must be permanently connected to the direct main line supply.
A plug and socket is not recommended to be used.
For the correct size of wire conductor corresponding to di erent electrical loadings,
please refer to Table 1.
This Undersink Heater operates at a minimum wat
ow rate of 3.0 liter/min and
maximum inlet water pressure of 6 Bar.
liter/min) to trigg
ow switch.
abnormal rise in water temperature.
2.6
