background image

1

1.

SAFETY INSTRUCTIONS AND PRELIMINARY CHECKS

WARNING! Important instructions for the safety of people, READ CAREFULLY! 

Save this manual for future consultation.

Do not allow children to play with the fixed command devices, or in the gate’s 

area of operation. 

Keep any remote control devices (i.e. transmitters) away from the children as 

well
Children are forbidden to carry out cleaning and maintenance unless accom-

panied by adults.
Children over 8 years, persons with reduced physical, sensorial, mental capa-

bilities or unexperienced people are limited to use the operator unless accom-

panied by a supervisor or unless they get properly aware of potential hazards 

associated.
Always cut the power off before operating.
Make sure the earth connection is duly wired.  

Wiring, installation and functional tests must be carried out by expert qualified per-

sonnel in full compliance with current regulation EN12453.

Use of this control panel must be restricted to the transformer supplied by the Ma-

nufacturer.
A circuit breaker must be fitted close to the gate in compliance with the wiring 

diagram and installation instructions (see paragraph 3).
Stay clear of the gate’s area of operation when in motion
Frequently check the system to see whetherany anomalies or signs of wear and 

tear appear on the moving

parts, on the component parts, on the securing points, on the cables and any ac-

cessible connections.

If the system requires repairs or modifi cations, release the operator and do not use 

it until safety conditions have been restored. 

Содержание Q81S





















Отзывы: