37
Using for the first time and operation
Make sure that the main switch is OFF (O)
Unroll the electrical cable entirely and insert the plug into a suitable
220/240V socket.
Set the main switch to ON (l). The display will show “S” (standby).
Manual operation using the buttons
Press the F button once. The ventilator will switch on and the display will show
Fig. A.
Press the button again and the heating will
switch on, on low power. The display will
show Fig. B.
Press the button a third time and the heating
will switch to full power. The display will show
Fig. C.
Press the button a fourth time and the swivel
function switches on. The display continues to
show Fig. C.
Press the button a fifth time and the unit
returns to standby (S). The unit will cool down for 30 minutes.
You can set a delayed start time using the timer button . Set the unit to
standby (S) and press the timer button. Each time you press the timer button,
one hour is added to the start time. The display shows the number of hours set
and counts down at the end of each hour. The timer lamp also switches on. The
unit starts automatically at the end of the set time. The standard temperature is
23°C (note it is not possible to set the thermostat using the buttons).
If the weekly programme is not set and if no temperature has been set using the
remote control, the unit will switch off automatically after 12 hours.
Operation using the remote control
Please note: the remote control only works if the emitter on the
remote control can make contact with the receiver on the unit.
Make sure that the unit is in standby mode (S) (use the main
switch).
Press the power button to switch the ventilator on; the
display will show Fig. A.
Press the function button to switch the heating on, on low
power. The display will show Fig. B.
Press the button again and the heating will switch to full power.
The display will show Fig. C.
Press the function button a third time and the unit will return to
mode A.
If you press the swivel button while one of the three functions is set, the
flap will move up and down, changing the direction of the air. Press the swivel
button again to turn this function off.
