13
Control panel EK9002:
The EK9002 control panel consists of two dials:
* The mode selector dial with 4 positions is located on the left.
From top to bottom:
-
O or off
-
fan only
-
4500W power (low)
-
9000W power (high)
* The continuously adjustable thermostat dial is located on the right.
Control panel EK15002:
The EK15002 control panel consists of two dials:
* The mode selector dial with 5 positions is located on the left.
From top to bottom:
-
O or off
-
fan only
-
5000W power (low)
-
10.000W power (average)
-
15.000W power (high)
* The continuously adjustable thermostat dial is located on the right.
On the panel of the EK9002 and EK15002 also is the reset point (see Safety features).
Location and Connection
Remove all packaging material and keep out of reach of children. After removing packaging, check the
appliance for damage or other signs that could indicate a fault/defect/malfunction. In case of doubt, do not
use the appliance, but contact your vendor for inspection or replacement.
Choose a suitable location for the heater, i.e. at least one metre away from any obstructions, walls or
inflammable materials (see also safety instructions). Always ensure that the heater has sufficient space at the
back to suck in air and at the front, to blow out hot air (1 metre).
Make sure the heater is always in an upright position on a solid, flat, horizontal and non-flammable surface.
Make sure the heater is switched off (switch to O position), then plug into a correctly functioning, properly
grounded 400V-50Hz socket. Only connect the heater to an
earthed
socket!
Set-up and Operation
If the heater is being used for the first time (or if you want to reset the desired temperature), turn the thermostat
dial to the maximum position (clockwise as far as it goes).
With the mode selector dial, adjust the heater to suit your preferences: fan only, low power (EK15002: average
power) or high power.
Once the temperature in the area being heated has reached the right level, slowly turn the thermostat dial
anticlockwise until you hear a soft click; leave the dial in that position. The heater will automatically maintain the
w
ww
.he
izs
trah
le
r-
shop24
.de
