EUROM 384666, Инструкция по эксплуатации, Страница: 12 / 36

12
Assembly
A. front grid
B. grid locking ring
C. fan
D. grid mount
E. rear grid
F. motor shaft
G. stand protrusion
H. foot cutaway
I. pedestal
J. foot
K. fan mounting knob
L. shaft pin
Unplug from the wall socket!
 Remove the fan mounting knob (only Vento 12&16) and the grid mount from
the motor shaft.
 Position the rear grid on the appropriate pins. Screw it tight with the grid
mount.
 Push the fan as far as possible onto the motor shaft. Vento 12 and 16:
ensure that the pins enter the grooves and tighten the fan with the fan
mounting knob by tightening it anti-clockwise.
 Check that the fan rotates freely if you turn it by hand.
 Open the grid locking ring a little by loosening the screw a bit. Place the front
grid on the rear grid so that the grid locking ring correctly encloses the edges
of the grids; the grids firmly against each other! Then tighten the grid locking
ring firmly with the screw. Check that everything is properly lined up.