INSTRUCTIONS FOR USE
5 - GB
DEPENDING ON THE MODEL, THE OVEN COULD HAVE ONE OF THE
FOLLOWING COMPONENTS:
Programmable clock
Setting current time
Press the knob until the light flashes and in 10 seconds set the time rotating the
knob. Press again to confirm.
General
•
if not deactivated (as per the instructions below), the buzzer stops after 1 minute
•
to cancel a setting that has been programmed, keep the knob pressed for about
3 seconds and the lights go out
•
the minimum programming time is 2 minutes
•
if there is a power cut, all the settings programmed stay memorized and when
the power returns, the light flashes. Press the knob and, when the setting that
has been programmed ends, reset the current time.
Timer buzzer (max 180 minutes)
To use as a simple buzzer, press the knob until the light flashes and set the
desired time rotating the knob in less than 10 seconds; the current time will
reappear and the light will stay on. To check the setting memorized, press the
knob until the light flashes.
To deactivate the buzzer, press the knob for about 3 seconds (the light goes
out).
Setting end of cooking time (max 15 hours)
To start cooking immediately and automatically set the cooking time, follow this
procedure:
•
select the function and temperature desired through the function selector and
the thermostat
Knob
