EN
100
• Press and
simultaneously for
0.5 seconds until “
00
” is shown on the
Timer Display.
Once a timer reaches “
00
”, the level of its
corresponding heater will also set to “
0
”.
The end of both the Heater Timer and
the Minute Minder Timer is indicated by
the buzzer sound, this can be stopped
by pressing any button.
Key Lock Function
The key lock function is used to set ‘safe
mode’ on the appliance and can only
be used in Operating Mode (B-Mode).
The lock function becomes active when
the key Lock button is pressed for
at least 2 seconds. This operation is
acknowledged by a buzzer and the Key
Lock Indicator will
fl
ash to indicate the
heater is locked.
If the heater is locked, it will only be pos-
sible to switch the appliance o
ff
by press-
ing , all other buttons are blocked and
it will not be possible to make any ad-
justments by pressing the buttons. If any
other button is pressed in the lock mode,
the buzzer will sound and the Key Lock
Indicator will
fl
ash.
Only the switch-o
ff
operation by press-
ing is possible. However, if the appli-
ance is switched o
ff
, it can not be restart-
ed again without being unlocked.
Child Lock
The child lock function is used to lock
the appliance in a complicated multi-
step process. Child lock (and unlocking)
is only available in the S-Mode.
First, must be pressed until the buzz-
er sounds, then
and
must be
pressed simultaneously for at least 0.5
seconds, but no longer than 1 second.
Following this, touch
to activate the
child lock. All four heater displays will
show “
L
” as con
fi
rmation.
If the minute minder timer is still running,
it will proceed until “
00
” is reached and
the timer will beep. After con
fi
rmation of
timer completion, the appliance will be
fully locked. None of the buttons can be
used as long as the appliance is locked.
Child lock can be deactivated by press-
ing until the buzzer sounds. Then
and
must be pressed simultaneous-
ly for at least 0.5 seconds, followed by
pressing
only.
As con
fi
rmation for successful unlock-
ing, “
L
” will no longer be displayed.
Touch Control Safety Functions
The following safety functions are avail-
able to avoid unintended operations.
Sensor Safety Cut-O
ff
To prevent the appliance from unwanted
button operation, button monitoring is
included. In cases where one or more
buttons are pressed for longer than