USER MANUAL
21
SLAVE MODE
z
Press FUNC to enter MODE OPTION
z
Till to SLAVE shown on LCD monitor.
Connect MASTER and SLAVE lasers with DMX cable. The SLAVE lasers are
in SLAVE MODE. Check
XLR Control cable connection
section for your
reference.
z
Press ENTER to confirm the laser to show the present mode at the ne xt
operation.
SETTING MODE
z
Press FUNC to enter MODE OPTION
z
Till to SETTING shown on LCD monitor.
z
Press UP/DOWN to choose MODE. You will have COLOR, MIRROR, MUSIC
modes. Press ENTER to confirm the mode.
z
COLOR MODE
：
SINGLE COLOR – singl e white color show
，
DOUBLE
COLOR – RGY three color show. MULTICOLOR – full color show
z
MIRROR MODE
：
Press UP/DOWN to chang e
scanned world mirror. UP is for Y direction mirror
setting and DOWN is for X direction mirror setting.
z
MUSIC MODE
：
To set the sensitivity of SOUND mode.
ILDA Control Mode
z
This unit has the ILDA DB25 port, and it can be controlled by the PC, There is
auto transform set in the inside of
the unit to transform the ILDA and
preprogrammed show. when connecting by the 25 pin cable, the unit will be
control by PC, when disconnect the unit, it will be preprogrammed program
control
。
z
In the theory, as long as it is ILDA B25
，
It can control this unit, but i n the
reality, some of the software can not control this unit, for the 4 pin and the 17
pin of the output card has n ot connect. In fact this is an easy problem. As
long as you connect them. It can control this unit.
