00083282, Version 1.0
21/23
Stand Alone mode
Setting solid colors
Press the MODE button until the LED display shows "
C
---", then press the ENTER button to confirm.
The desired color can be selected via the UP or DOWN buttons, then press the ENTER button again to
confirm.
Mode:
Value:
Function:
C
C 1
Red
C 2
Green
C 3
Blue
C 4
Cyan
C 5
Magenta
C 6
Yellow
C 7
White
Auto Mode
In Auto Mode the internal program is called up automatically in a continuous loop.
Press the MODE button until the LED display shows "
P
---", then press the ENTER button to confirm
The desired program can be selected via the UP or DOWN buttons, then press the ENTER button again to
confirm.
Mode:
Value:
Function:
P
P 1
Endless loop in 7 colors,
change every 3 seconds
P 2
Endless loop in 7 colors,
fade every 3 seconds
P 3
Endless loop in 3 colors,
change every 3 seconds
P 4
Endless loop in 3 colors,
fade every 3 seconds
P 5
Endless loop in 7 colors,
via sound control
P 6
Endless loop in 3 colors,
via sound control
Sound control/ sensitivity
Press the MODE button until the display shows
S--
, you can select the desired sensitivity via the UP or
DOWN buttons, S S00-S100 (S50 default).
Press ENTER to confirm.
DMX-Mode
The device has different DMX channel modes. The Control Board allows you to assign the DMX channel
mode and the DMX fixture address, which is defined as the first channel from which the device will respond
to the controller.
Addressing
Press the MODE button until the display shows 3CH or 5CH. Press the ENTER button. The display shows
"d—". You can now set the desired address via the UP or DOWN buttons. Press ENTER to confirm.
Please, be sure that you don’t have any overlapping channels in order to control each device correctly and
independently from any other fixture on the DMX-chain. If several devices are addressed similarly, they will
work synchronically.
Controlling:
After having addressed the device, you may now start operating it via your lighting controller.
Please see the following DMX protocol graphics for the respective channel values.
