00064545.DOC, Version 1.0
20/23
Connection with the mains
Connect the device to the mains with the enclosed power supply cable.
The occupation of the connection-cables is as follows:
Cable
Pin
International
Brown
Live
L
Blue
Neutral
N
Yellow/Green
Earth
The earth has to be connected!
If the device will be directly connected with the local power supply network, a disconnection switch with a
minimum opening of 3 mm at every pole has to be included in the permanent electrical installation.
The device must only be connected with an electric installation carried out in compliance with the IEC-
standards. The electric installation must be equipped with a Residual Current Device (RCD) with a maximum
fault current of 30 mA.
Lighting effects must not be connected to dimming-packs.
OPERATION
After you connected the EUROLITE LED PTN-5 Flower Effect to the mains, the device starts running.
The LED display lights up and you can now choose the desired settings via the buttons MODE, ENTER, UP
and DOWN.
-
STANDALONE-MODE
-
Auto Mode
-
Sound Mode
-
Master/Slave Mode
-
DMX MODE
Stand Alone-Mode
Auto Mode
In Auto Mode the internal program is called up automatically in a continuous loop.
Press the MODE button until the LED display shows "AUTO".
Please press the ENTER button to confirm.
To set the desired program speed, press the MODE button until the LED display shows "s---". The desired
speed (s001 - s100, increasing) can be selected via the UP or DOWN buttons.
Please press the ENTER button to confirm.
Sound Mode
Press the MODE button until the LED display shows "snd".
Please press the ENTER button to confirm.
Master/Slave Mode
The master/slave operation enables that several devices can be synchronized and controlled by one master
device.
