00069590.DOC, Version 1.0
27/27
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Unscrew the fuseholder with a fitting screwdriver from the housing (anti-clockwise).
Step 2:
Remove the old fuse from the fuseholder.
Step 3:
Install the new fuse in the fuseholder.
Step 4:
Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
230 V AC, 50 Hz ~
Power consumption:
470 W/480 VA
DMX control channels:
3/5/48/51
DMX512 connection:
5-pin and 3-pin XLR
Flash-rate:
20 Hz
Sound-control:
via built-in microphone
Number of LEDs:
16
LED type:
Cluster 30 W, RGB
Beam angle:
approx. 60°
Dimensions (LxWxH):
180 x 425 x 400 mm
Weight:
10.5 kg
Maximum ambient temperature T
a
:
45° C
Maximum housing temperature T
C
:
65° C
Min.distance from flammable surfaces:
0.5 m
Min.distance to lighted object:
0.1 m
Fuse:
F 3 A, 250V
Please note: Every information is subject to change without prior notice. 25.04.2012 ©
