EuroLite LED PMC-16x30W COB RGB, Руководство пользователя

Страница: 23 / 27

00069590.DOC, Version 1.0 23/27
OPERATION
After you connected the LED PMC-16X30W COB RGB to the mains, it starts running.
The LCD display lights up and you can choose the desired mode via the buttons MODE, ENTER, UP and
DOWN.
The device has two operating modes. It can be operated in Stand Alone Mode via the Control Board or in
DMX-controlled mode via every standard DMX controller
- STAND ALONE-MODE
Static colors/Internal programs
Auto Mode
Sound Mode
Slave Mode
- DMX MODE
STAND ALONE-MODE
Static colors / Internal programs
A chaser is a sequence of different steps that will be called up one after another in a continuous loop. With
the LED PMC-16x30W COB RGB, you can select up to 14 different chasers plus static colors.
Selecting a chaser
Press the MODE button to select the internal program mode. Select the desired chaser (P01 – P15) via the
UP or DOWN buttons (see following graphic).
Press the ENTER button to select speed and flash settings, respectively. You can select the desired values
via the UP or DOWN buttons.
Speed from 01 to 99, increasing.
Flash from 00 to 99, increasing.
Please press the ENTER button to confirm and to exit this mode.
01 Static colors
Blackout, red-green-blue-yellow-cyan-purple-white;
CL: RGB Flash 00 - 99
02 Dream Seven color dreaming
03 Meteor Seven color flow
04 Fade Seven color fade
05 Change Seven color change
06 Flow 1 Seven color chase in 1 direction
07 Flow 2 Seven color chase in 2 directions
08 Flow 3 Seven color chase relay in vertical direction
09 Flow 4 Seven color chase relay in horizontal direction
10 Flow 5 Seven color chase from 2 sides to the middle
11 Flow 6 Seven color chase from the middle to 2 sides
12 Flow 7 Seven color chase square in 1 direction
13 Flow 8
Seven color chase relay/square from the inside to the outside
14 Flow 9
Seven color chase diagonal in 1 direction
15 Flow 10
Seven color chase diagonal in 2 directions