00068759.DOC, Version 1.1
23/25
DMX MODE
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the LED PMB-8 COB 3200K 30W Bar will respond to the controller.
Addressing
Press the MODE button until the display shows DMX MODE.
Press the ENTER button and the display shows: A001.
Set the desired address via the UP or DOWN buttons.
Please press the ENTER button again to confirm and to select a DMX Channel Mode.
Controlling:
After having addressed the LED PMB-8 COB 3200K 30W Bar, you may now start operating it via your
lighting controller.
DMX Channel Selection : Choosing a DMX Channel Mode up to 11 Channal Occupation
After having set the desired addresses and pressed ENTER, you can now choose a DMX Channel Mode.
(1 CH, 8 CH, 11 CH).
Set the desired mode via the UP or DOWN buttons.
Press the ENTER button again to confirm.
Please see the following DMX protocol graphic for the respective channel values.
DMX-Protocol
The LEDs of the devices are separated into 8 spots (segments) which can be controlled in the following 3
different modes.
1-Channel Mode:
All 8 segments controlled together
Value
Dimmer
000 -255
0-100 % Increasing brightness
8-Channel Mode
:
Each segment can be controlled individually
Channel:
Value:
Function:
1
000 – 255
Spot
1
Increasing brightness (0 – 100%)
Channel:
Value:
Function:
2
000 – 255
Spot
2
Increasing brightness (0 – 100%)
Channel:
Value:
Function:
3
000 – 255
Spot
3
Increasing brightness (0 – 100%)
Channel:
Value:
Function:
4
000 – 255
Spot
4
Increasing brightness (0 – 100%)
Channel:
Value:
Function:
5
000 – 255
Spot
5
Increasing brightness (0 – 100%)
Channel:
Value:
Function:
6
000 – 255
Spot
6
Increasing brightness (0 – 100%)
Channel:
Value:
Function:
7
000 – 255
Spot
7
Increasing brightness (0 – 100%)
Channel:
Value:
Function:
8
000 – 255
Spot
8
Increasing brightness (0 – 100%)
