00068759.DOC, Version 1.1
22/25
The device has two operating modes. It can be operated in Stand Alone via LCD display with operating
buttons or in DMX-controlled mode via lighting controller.
- STAND ALONE-MODE
•
Internal Programs
•
Auto Mode
•
Master/Slave Mode
•
Sound Mode
- DMX MODE
STAND ALONE-MODE
Internal programs
A chaser is a sequence of different steps that will be called up one after another in a continuous loop. With
the LED PMB-8 COB 3200K 30W Bar, you can select up to 8 different chasers.
Selecting a chaser
Press the MODE button to select the internal program mode. Select the desired chaser (P01 – P08) via the
UP or DOWN buttons (see following graphic).
Press the ENTER button to select speed and flash settings, respectively. You can select the desired values
via the UP or DOWN buttons.
Speed from 00 to 99, increasing.
Flash from 00 to 99, increasing.
Please press the ENTER button to confirm and to exit the
Internal Programs Mode
.
01 = Dimming
WW 0 – 255
Flash 00-99
02 = Dream
Speed 00-99
Flash 00-99
03 = Meteor
Speed 00-99
Flash 00-99
04 = Fade
Speed 00-99
Flash 00-99
05 = Change
Speed 00-99
Flash 00-99
06 = Flow 1
Speed 00-99
Flash 00-99
07 = Flow 2
Speed 00-99
Flash 00-99
08 = Flow 3
Speed 00-99
Flash 00-99
Auto Mode
In Auto Mode, the chasers are called up automatically in a continuous loop.
Press the MODE button to select the AUTO mode.
Press the ENTER button to select the desired frequency of the loops.
The desired frequency of the loops (Frequency = FQN 01-99) can be selected via the UP or DOWN buttons.
Please press the ENTER button to confirm.
Master/Slave Mode
Press the MODE button to select the SLAVE mode. The devices set in this manner can now be controlled by
the master unit.
Please press the ENTER button to confirm.
Sound Control Mode
Press the MODE button and choose Sound Controlled Mode (SOUND).
Press the ENTER button to select the desired sensitivity.
The desired sensitivity (SENS 00-31) can be selected via the UP or DOWN buttons.
Please press the ENTER button again to confirm.
