00137991, Version 1.0
27/32
Stand-alone mode
Brightness
In the
BRIGHTNE
mode the device will constantly in the set brightness.
1
Press the
MENU
button so many times until
BRIGHTNE
is indicated in the display. Confirm with the
ENTER
button.
2
Use the buttons
UP
and
DOWN
to adjust the desired brightness (
01-10
). Confirm with the ENTER
button.
Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the
music (sufficient bass provided).
1 Press the
MENU
button so many times until
SOUND
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to select the desired show program. Confirm with the
ENTER
button.
2 Press the
MENU
button so many times until
SPEED
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to adjust the running speed of the program from
01
(slow) to
09
(fast). Confirm with the
ENTER
button.
3 Press the
MENU
button so many times until
SENSITIV
is indicated in the display. Confirm with the
ENTER
button. Use the buttons
UP
and
DOWN
to Adjust the microphone sensitivity to the volume of the
music (
01
= low,
09
= high).
4 If you enable the silent scene mode (
on
setting) in menu item
SILENT
,
the LEDs will be switched off if
the volume is too low or if there is no sufficient bass beat. If you disable this mode (
off
setting) the LEDs
remain on during periods without music.
White color setting
In the color mode
COLOR,
the LEDs can be adjusted for brightness. The device will constantly emit the color
adjusted.
1
Press the
MENU
so many times until
COLOR
is indicated in the display. Confirm with the
ENTER
button.
2
Now the display indicates the letter “
W
” for white color and the corresponding brightness value. Use the
buttons UP and DOWN to adjust the desired brightness. Confirm with the ENTER button.
Total brightness
Menu
DIMMING
allows adjusting the total brightness for all stand-alone operating modes.
1
Press the
MENU
button so many times until
DIMMING
is indicated in the display. Confirm with the
ENTER
button.
2 Use the buttons
UP
and
DOWN
to adjust the desired brightness (
001
= dark,
100
= bright). Confirm with
the
ENTER
button.
Strobe effect
In
FLASH
mode the speed for strobe effect can be set.
1
Press the
MENU
button so many times until
FLASH
is indicated in the display Confirm with the
ENTER
2 Use the buttons
UP
and
DOWN
to adjust the desired speed (
000-100
). Confirm with the
ENTER
button.
Behavior at missing DMX-signal
In
DMX lost
mode the program offers different options when no DMX signal is received.
1
Press the
MENU
button repeatedly until the display shows the
DMX lost
menu. Confirm with the
ENTER
button.
2 Select the desired program with the
UP
and
DOWN
buttons (see menu structure). Confirm with the
ENTER
button.
